Visit YaBB!

 Installation

Home

 Introduction 
Installation

   Users    
    Registering
    Logging In/Out
    Profile
    Posting
    IM (Instant Message)
    FAQ

   Moderation
     Moderator Actions

   Administration
     Introduction
     Member Functions
     Forum Functions
     Forum Setup
     FAQ

Valid HTML 4.01!
Valid CSS!

Installation Time!

Installation Time
Congratulations!

Please note that wherever 'YaBB.pl' is referred to, you may have the 'YaBB.cgi' file instead. They are the same file with a different name, depending on which package you have downloaded.

Installation Time

First open 'YaBB.pl', which is in the 'cgi-bin/YaBB' folder of the package you downloaded. This file contains a path to your server's Perl location. Generally, this setting is correct, but Perl can be installed in different locations. For example on a Windows or WinNT machine, your Perl path should probably be set to #!C:/Perl/Bin. Check your server for the proper path and change accordingly.

Next open 'Settings.pl' and set the variables inside as follows:


Required Settings-->
$mbname
The name of your YaBB forum
$boardurl
URL of your board's folder (without trailing '/') - where YaBB.pl is located
$cookieusername
Name of the username cookie (no change necessary)
$cookiepassword
Name of the password cookie (no change necessary)
$mailprog
Location of your sendmail program (generally "/usr/sbin/sendmail" or similar)
$webmaster_email
Your e-mail address, such as [email protected]~
$boarddir
Absolute path to the board's folder (usually can be left as '.')
$datadir
Directory with messages (can be left alone unless you wish to move elsewhere)
$memberdir
Directory with member files (can be left alone unless you wish to move elsewhere)
$boardsdir
Directory with board data files (can be left alone unless you wish to move elsewhere)
$sourcedir
Directory with YaBB source files (can be left alone unless you wish to move elsewhere)
$vardir
Directory with variable files (can be left alone unless you wish to move elsewhere)
$facesurl
URL to your avatars folder (without trailing '/')
$facesdir
Absolute Path to your avatars directory (this MUST be correct for profile page to display)
$imagesdir
URL to your images folder (without trailing '/')
$helpfile
URL to your help index file (http://www.mysite.com/yabbhelp/index.html)

The remaining settings in Settings.pl are not required, but are only feature and layout variables. It is recommended that you DO NOT change them until you get YaBB working! After that, have fun....

Open 'template.html' and modify the layout as you wish (to make it look like your site). Note: the tags beginning with "<yabb " MUST REMAIN in the template.html file. You may move them around as you wish, but leave them somewhere in the file, or things will not show up. The tag "<yabbnews>" has been removed in this version, in favor of the NewsFader script. You may insert this tag if you would like the old text news format back on your YaBB. (But be sure to set $ShowNewsFader to '0' before you put that tag back in, or you'll have the news twice on the Board Index.) It is recommended that you do not change template.html either until you get YaBB working!

Although we think it is great that people like to "hack YaBB" and make mods, NEVER install mods before installing a new yabb board. Always get the board to work first, then install mods and reupload your files. YaBB does not support any mods - you are on your own if you install them.

Step 2 - Create Directories

In your 'cgi-bin', create a directory called "yabb" (or whatever name you wish to use). If you do not have a cgi-bin, then first create a directory called 'cgi-bin' and then inside that create the 'yabb' directory. The example structure is provided in the YaBB package you've downloaded.

You should have a folder structure similar to the following:

   cgi-bin/yabb/
   cgi-bin/yabb/Boards
   cgi-bin/yabb/Members
   cgi-bin/yabb/Messages
   cgi-bin/yabb/Sources
   cgi-bin/yabb/Variables
Then, in a section of your webspace (outside the cgi-bin, generally in a 'public_html' folder, as suggested in the package's folders), create another directory called 'yabbimages' or something similar:

   /yabbimages/
And create another directory called 'yabbhelp' or something similar in a section of your webspace:

   /yabbhelp/
Step 3 - Upload Files
Place the files from the downloaded zip into the directories as shown below and be sure to "chmod" them as shown below. Be sure to upload ALL .pl/.cgi files in ASCII mode. Chmod is not supported on Windows servers, so there is no need to do that step after uploading (or extracting) the files. On a Windows/NT server, however, you will need to give the data folders (those specified to be chmod 777) full read/write permissions.

------- NON cgi-bin section ---------
   /ubbc.js
   /fader.js
   /yabbhelp/			*.*             (Upload in Ascii)
   /yabbhelp/images		*.*             (Upload in Binary!)
   /yabbimages/			*.gif all files (Upload in Binary!)
   /yabbimages/avatars		*.* all files   (Upload in Binary!)
------- CGI-BIN section (all files in ASCII) ---------
   /yabb/                             drwxrwxrwx (chmod 777 or 755)
   /yabb/YaBB.pl                      -rwxr-xr-x (chmod 755)

   /yabb/Settings.pl                  drwxrwxrwx (chmod 777)
   /yabb/template.html                drwxrwxrwx (chmod 777)
   /yabb/english.lng                  -rw-r--r-- (leave as is) # or another language file

/yabb/Boards drwxrwxrwx (chmod 766 or 777) /yabb/Boards/.htaccess -rw-r--r-- (leave as is) /yabb/Boards/general_cat.cat -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Boards/news.dat -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Boards/news.txt -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Boards/sticky.stk -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Members drwxrwxrwx (chmod 766 or 777) /yabb/Members/.htaccess -rw-r--r-- (leave as is) /yabb/Members/admin.dat -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Members/memberlist.txt -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Messages drwxrwxrwx (chmod 766 or 777) /yabb/Messages/.htaccess -rw-r--r-- (leave as is) /yabb/Sources drwxrwxrwx (chmod 766 or 777) /yabb/Sources/Admin.pl -rw-r--r-- (leave as is) /yabb/Sources/AdminEdit.pl -rw-r--r-- (leave as is) /yabb/Sources/BoardIndex.pl -rw-r--r-- (leave as is) /yabb/Sources/Display.pl -rw-r--r-- (leave as is) /yabb/Sources/ICQPager.pl -rwxr-xr-x (chmod 755) /yabb/Sources/InstantMessage.pl -rw-r--r-- (leave as is) /yabb/Sources/Load.pl -rw-r--r-- (leave as is) /yabb/Sources/LockThread.pl -rw-r--r-- (leave as is) /yabb/Sources/LogInOut.pl -rw-r--r-- (leave as is) /yabb/Sources/Maintenance.pl -rw-r--r-- (leave as is) /yabb/Sources/ManageBoards.pl -rw-r--r-- (leave as is) /yabb/Sources/ManageCats.pl -rw-r--r-- (leave as is) /yabb/Sources/Memberlist.pl -rw-r--r-- (leave as is) /yabb/Sources/MessageIndex.pl -rw-r--r-- (leave as is) /yabb/Sources/ModifyMessage.pl -rw-r--r-- (leave as is) /yabb/Sources/MoveThread.pl -rw-r--r-- (leave as is) /yabb/Sources/Notify.pl -rw-r--r-- (leave as is) /yabb/Sources/Post.pl -rw-r--r-- (leave as is) /yabb/Sources/Profile.pl -rw-r--r-- (leave as is) /yabb/Sources/Recent.pl -rwxr-xr-x (chmod 755) /yabb/Sources/Register.pl -rw-r--r-- (leave as is) /yabb/Sources/RemoveOldThreads.pl -rw-r--r-- (leave as is) /yabb/Sources/RemoveThread.pl -rw-r--r-- (leave as is) /yabb/Sources/Search.pl -rw-r--r-- (leave as is) /yabb/Sources/Security.pl -rw-r--r-- (leave as is) /yabb/Sources/Subs.pl -rw-r--r-- (leave as is) /yabb/Sources/YaBBC.pl -rw-r--r-- (leave as is) /yabb/Variables drwxr-xr-x (chmod 766 or 777) /yabb/Variables/.htaccess -rw-r--r-- (leave as is) !!DO NOT UPLOAD IF UPGRADING /yabb/Variables/agreement.txt -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Variables/ban.txt -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Variables/ban_email.txt -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Variables/ban_log.txt -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Variables/ban_memname.txt -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Variables/cat.txt -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Variables/censor.txt -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Variables/clicklog.txt -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Variables/flood.txt -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Variables/log.txt -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Variables/membergroups.txt -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Variables/news.txt -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Variables/oldestmes.txt -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Variables/reserve.txt -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING /yabb/Variables/reservecfg.txt -rw-rw-rw- (chmod 666) !!DO NOT UPLOAD IF UPGRADING There is a ksh (UN*X) script available to set the permissions as needed, get it here. (note: this script is not endorsed by YaBB.)
Step 4 - Run, Log In and Test
Try to execute your YaBB board now! In your web browser, go to the url that you specified in $boardurl of Settings.pl with /YaBB.pl (or /YaBB.cgi for the cgi version) on the end (such as http://www.mysite.com/cgi-bin/yabb/YaBB.pl). Remember most servers are case-sensitive.

If you can't run the board, please re-do the above 3 steps and consulting the troubleshooting section of this manual. After you have successfully run your YaBB board from the web, you need to try logging in. The default username is "admin" and default password is "admin". They will always be so when you install a new YaBB board. Login with that information and you should see an "Admin" icon in the menu of the YaBB board. Clicking it will take you to the "Admin Center" where you can see all sorts of nifty things to do.

Test everything (that you know exists), such as posting, registering a new member, modifying message.. etc. Then after that, go to the admin center to create some new boards.

Congratulations!

Congratulations, you've now got a great open-source bulletin board all for yourself!